Educational Resources for Quality.
October 17, 2017
Published by Amy Gulland on October 17, 2017
While there are many benefits of 3D Scanning, this article focuses on the benefits of scanning for reverse engineering
October 28, 2016
Published by Amy Gulland on October 28, 2016
Learn how to qualify 3D printed parts that can't be verified with traditional inspection methods.
June 13, 2016
Published by Amy Gulland on June 13, 2016
Learn about common considerations when inspecting firearms and why experience matters.
February 8, 2016
Published by Amy Gulland on February 8, 2016
With the emergence of non-contact 3D scanning, the whole prosthetic device manufacturing process takes considerably less time with much faster data collection and improved accuracy.
December 7, 2015
Published by Al Luce on December 7, 2015
We’re excited to have guest author Scott Shuppert provide his insight into the importance of using 3D CAD models in the design process. Scott is a 30-year veteran of […]
October 16, 2015
Published by Amy Gulland on October 16, 2015
We’re excited to have guest author Scott Shuppert provide his insight into the importance of both time and accuracy when scanning parts for the aerospace and defense industries. […]
September 10, 2015
Published by Al Luce on September 10, 2015
Production downtimes can be a big hurdle and mean big costs for any manufacturer. As the saying goes, time is money. That’s why Computer Aided Verification, […]
July 21, 2015
Published by Amy Gulland on July 21, 2015
Amy Gulland introduces Virtual CMM Training and Offline CMM Programming services as additional ways in which The QC Group can be an extension of your team.
July 8, 2015
Published by Al Luce on July 8, 2015
The right laser scanning equipment can accurately define localized shrinkage in a cast or molded component. Often times, this method is used to troubleshoot tooling by developing […]
June 5, 2015
Published by Al Luce on June 5, 2015
3D scanning technologies have matured to the point where virtually any object can be scanned and converted to an electronic image. With the right equipment, the right software, and some […]
May 1, 2015
Published by Amy Gulland on May 1, 2015
It was 1984 and Prince’s When Doves Cry was the number one hit on the radio. Dan Medford, styled with an Oshkosh color block shirt and refined […]
January 23, 2015
Published by Amy Gulland on January 23, 2015
QC Staffing has a rare opportunity for you to get inside the minds of recruiters with a 1-hour webinar with tips and tricks to writing an outstanding resume.
January 19, 2015
Published by Al Luce on January 19, 2015
Reduce your laser scanning costs without sacrificing quality. Here are four ways to approach your project, keeping both cost and quality in mind.
December 9, 2014
Published by Amy Gulland on December 9, 2014
Each member of our engineering team have committed to completing studies and obtaining certification in the Design of Plastic Parts for Injection Molding.
December 3, 2014
Published by Al Luce on December 3, 2014
Brought to you by The QC Group, Engineering Division. This five-part tutorial will enable you to fully explore the power of our interactive 3D color map reports […]