Validating your injection molding process is critical to consistently producing high quality parts that must meet customer specifications.  Precision laser scanning can provide a complete understanding of how your part is affected by changes in process parameters.  You will be able to analyze profiles and geometry that cannot be fully characterized by CMM measurements.

A typical scan and comparative analysis can be accomplished in less than 48 hours.  The cost for 3 average sized parts is usually less than $400.

Precision laser scanning is used to accurately capture 100% of the part geometry.  Comparative analysis identifies and quantifies deviations of all profiles and geometry.  The point cloud can be analyzed against the 3D model or between parts.  Use the comparative analysis to perform a direct comparison of parts between validation runs.  It can also be used to capture specific feature dimensions.

Send us a simple quote request or give us a call (952-895-1150) to find out how we can help you streamline and grow your business.

Al Luce
Al Luce
Al is The QC Group’s Sales Engineer bringing decades of manufacturing and engineering experience to support customers’ toughest quality challenges. With hands-on knowledge in an array of industries, he is the man to bring clarity to all your engineering needs. His particular passion revolves around process control and validation - critical factors in developing high-quality products.

Comments are closed.

Talk to a Quality Expert.

952-895-1150   8a-5p Mon-Fri, CST

QC Group, LLC. | Headquarters
5950 Clearwater Drive, Suite 300
Minnetonka, MN 55343
Get Directions | 952-895-1150

Irving, Texas
4100 W Royal Lane, Suite 125
Irving, TX 75063
Get Directions | 972-915-4333

Albuquerque, New Mexico
1451 Innovation Parkway SE, Suite 650
Albuquerque, NM 87123
Get Directions | 505-299-0975

Effective July 1, 2015, QC Group’s training division separated from QC Group, LLC and began operation as a standalone business entity, QC Training Services, Inc.

They provide individual and group training in a variety of quality and manufacturing topics.  If you are interested in these services, please contact them at

Inquiries that we receive for training services will be forwarded.