Scanning and CAD Modeling
Tooling.


Precision For Tooling Development.

A combination of scanning and selected dimensional inspection is most often the best approach to capture precision data for tooling development. Scanning accuracy for smaller inserts is +/-.00025”. Shutoffs and other critical features may be inspected with a touch-probe CMM to +/-.000050”. QC Group employees have extensive experience in tool rooms and with tool design. It helps us understand your particular tooling challenges and what you need to solve. Most scans and inspections are performed on die components or mold inserts, but our equipment is capable of handling an entire mold base if necessary. Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.

Scanning and CAD Modeling
Tooling.

Precision For Tooling Development.

A combination of scanning and selected dimensional inspection is most often the best approach to capture precision data for tooling development. Scanning accuracy for smaller inserts is +/-.00025”. Shutoffs and other critical features may be inspected with a touch-probe CMM to +/-.000050”.

Industry-Specific Expertise.

QC Group employees have extensive experience in tool rooms and with tool design. It helps us understand your particular tooling challenges and what you need to solve. Most scans and inspections are performed on die components or mold inserts, but our equipment is capable of handling an entire mold base if necessary.

With Direct Communication.

Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.

Tell us about your project! Call 952-895-1150. 8am-5pm CST

Story-Worthy Engineering Services

Built for responsiveness.

QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used for validating tooling, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With equipment and skills specifically developed for precision components, we’ll find the best approach to completing your project.

Equipment, Capabilities.

Scanning Platforms
  • CMM Laser Scanners
  • Chromatic White Light Scanning Interferometry
  • Confocal Micro Laser Scanner
  • Portable CMMs with Laser Scanning
  • CT Scanning (internal geometries)
Software Platforms
  • Geomagic
  • Polyworks
  • Rapidform
  • SolidWorks
  • Pro-E, Creo
  • AutoDesk Inventor
  • Rhinoceros
Support Capabilities
  • Robust Inventory Control System
  • 2,000 lb hoist capacity
  • Horizontal Bandsaw
  • Parts Cleaning Station
  • Small Parts Grit Blaster

For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.


Qualifications, Accreditations, and Certifications.

Plastics Technology

All CAD Specialists have completed Designing Plastic Parts for Injection Molding studies.

ITAR Registered
ASQ Certifications

All inspectors are certified to one or more of the following:

  • CQI (Certified Quality Inspector)
  • CMI (Certified Mechanical Inspector)
  • CQT (Certified Quality Technician)
  • CQE (Certified Quality Engineer)
  • CQM (Certified Quality Manager)
  • CQA (Certified Quality Auditor)

  • Duns Number:19-993-4829
  • NAICS: 541380 (Mech. Testing Lab or Services)
  • Cage Code: 0GB04
  • SIC Code: 8734

    • Something missing? Send us a message or call 952-895-1150 with special considerations.

Scanning Outputs


Point Cloud
  • Raw 3D Scan Data (.txt, .asc)

Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.

raw point cloud data preview of a metal bracket
Polygons
  • Raw 3D Scan Data with a polygonal wrap (.stl)

Neutral file primarily used by the 3D printing industry.

polygonal mesh preview of a metal bracket
Analysis
  • 2D Visual Report (.pdf)
  • 3D Interactive Report (.pwzip)

Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.

Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".

deviation analysis preview of a metal bracket

Modeling Outputs


Native Parametric Formats

Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.

NURBS File Format

Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)

All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.

parametric cad model preview of a metal bracket



When you may need dimensional inspection vs 3D scanning.

Do you need specific dimensional results to resolve a tooling problem?

A 3D scan may be an acceptable initial validation step for your tooling. However, if you need more detail, a CMM inspection may be a better solution.

Do you need accuracy less than 8 microns?

When your tolerances are in the 2-10 micron range, a touch probe or vision CMM is a better solution than 3D scanning. Chromatic white light scanning and confocal micro-laser scanning will produce tighter accuracies, but are limited to relatively flat surfaces, measuring micro-topography.

Does your inspection involve a large number of dimensions?

Measuring multiple features can be done with both a traditional CMM and by extracting the data from a 3D scan. However, it is generally more efficient to extract a few dimensions from a 3D scan than several hundred. As a guide, 20 (or fewer) dimensions on 1 or 2 parts is a good number for 3D scanning. As the dimensions and number of pieces increase, programming and inspecting with a CMM is more cost effective.

Helping you find the best solution.

QC Engineering is dedicated to helping you solve your quality and design challenges. In these situations, we work with QC Inspection to create solutions that are comprehensive, cost-effective, and appropriate to achieve your goals.

Explore Dimensional Inspection

Send us a message, or call us 952-895-1150, and let us guide you to the right solution.

Story-Worthy Engineering Services

Built for responsiveness.

QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used for validating tooling, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With equipment and skills specifically developed for precision components, we’ll find the best approach to completing your project.

Equipment, Capabilities.

Scanning Platforms
  • CMM Laser Scanners
  • Chromatic White Light Scanning Interferometry
  • Confocal Micro Laser Scanner
  • Portable CMMs with Laser Scanning
  • CT Scanning (internal geometries)
Software Platforms
  • Geomagic
  • Polyworks
  • Rapidform
  • SolidWorks
  • Pro-E, Creo
  • AutoDesk Inventor
  • Rhinoceros
Support Capabilities
  • Robust Inventory Control System
  • 2,000 lb hoist capacity
  • Horizontal Bandsaw
  • Parts Cleaning Station
  • Small Parts Grit Blaster

For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.

 

Qualifications, Accreditations, and Certifications.

Plastics Technology

All CAD Specialists have completed Designing Plastic Parts for Injection Molding studies.

ITAR Registered
ASQ Certifications

All inspectors are certified to one or more of the following:

  • CQI (Certified Quality Inspector)
  • CMI (Certified Mechanical Inspector)
  • CQT (Certified Quality Technician)
  • CQE (Certified Quality Engineer)
  • CQM (Certified Quality Manager)
  • CQA (Certified Quality Auditor)

  • Duns Number:19-993-4829
  • NAICS: 541380 (Mech. Testing Lab or Services)
  • Cage Code: 0GB04
  • SIC Code: 8734

Scanning Outputs


Point Cloud
  • Raw 3D Scan Data (.txt, .asc)

Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.

raw point cloud data preview of a metal bracket
Polygons
  • Raw 3D Scan Data with a polygonal wrap (.stl)

Neutral file primarily used by the 3D printing industry.

polygonal mesh preview of a metal bracket
Analysis
  • 2D Visual Report (.pdf)
  • 3D Interactive Report (.pwzip)

Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.

Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".

deviation analysis preview of a metal bracket

Modeling Outputs


Native Parametric Formats

Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.

NURBS File Format

Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)

parametric cad model preview of a metal bracket

All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.
 

Tell us about your project! Call 952-895-1150. 8am-5pm CST

"Not sure how to say this besides - THANK YOU for the quick turn-around! Our customer wanted a big job completed quicker than we could handle. Your group jumped right in and got it going.

We look really good to our customer and their project is rolling along nicely!"

- John W, TechNH, Inc.

Talk to a Quality Expert.

952-895-1150   8a-5p Mon-Fri, CST

QC Group, LLC. | Headquarters
5950 Clearwater Drive, Suite 300
Minnetonka, MN 55343
Get Directions | 952-895-1150

Irving, Texas
4100 W Royal Lane, Suite 125
Irving, TX 75063
Get Directions | 972-915-4333

Albuquerque, New Mexico
1451 Innovation Parkway SE, Suite 650
Albuquerque, NM 87123
Get Directions | 505-299-0975

Effective July 1, 2015, QC Group’s training division separated from QC Group, LLC and began operation as a standalone business entity, QC Training Services, Inc.

They provide individual and group training in a variety of quality and manufacturing topics.  If you are interested in these services, please contact them at qctraininginc.com.

Inquiries that we receive for training services will be forwarded.

qctraininginc.com