Scanning and CAD Modeling
Blades & Vanes.
Industry-Specific Capability.
QC Engineering has extensive experience developing complex airfoil profiles. With our flexible schedule we can be on location anywhere in the US to capture data on large power generation equipment when it is not practical to ship it to one of our locations. Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.
Scanning and CAD Modeling
Blades & Vanes.
Industry-Specific Capability.
QC Engineering has extensive experience developing complex airfoil profiles. Whether comparing the shape of two parts or re-constructing the geometry from the root up, QC’s scanning and measuring capabilities can produce accurate results quickly.
Giving You Capacity & Capability
In addition to scanning, Blade capabilities include PCDMIS BLADE, equipment for cutting, polishing and verifying all dimensional aspects of blades and vanes.With our flexible schedule we can be on location anywhere in the US to capture data on large power generation equipment when it is not practical to ship it to one of our locations.
With Direct Communication
Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.
Tell us about your project! Call 952-895-1150. 8am-5pm CST
- Story-Worthy Service
- Equipment, Capabilities
- Accreditation, Certifications
- Sample Outputs, Files
- Scanning vs CMM Inspection
Story-Worthy Engineering Services
Built for responsiveness.
QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used specifically for blade validation, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.
To take you to the next step.
When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. You’ll know the accuracy of the CAD model or scan we provide by attending a live on-line review at project close. With a vast set of resources in multiple locations, there is always a way to get your scanning or modeling job done.
Equipment, Capabilities.
Scanning Platforms
- Portable CMMs with Laser Scanning
- CMM Laser Scanners
- Chromatic White Light Scanning Interferometry
- Confocal Micro Laser Scanner
- CT Scanning (internal geometries)
Software Platforms
- Geomagic
- Polyworks
- Rapidform
- SolidWorks
- Pro-E, Creo
- AutoDesk Inventor
- Rhinoceros
Support Capabilities
- Robust Inventory Control System
- 2,000 lb hoist capacity
- Polishing Wheel
- Cutoff Machine
- Wire EDM resources
- Horizontal Bandsaw
- Parts Cleaning Station
For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.
Qualifications, Accreditations, and Certifications.
ITAR Registered
ASQ Certifications
All inspectors are certified to one or more of the following:
- CQI (Certified Quality Inspector)
- CMI (Certified Mechanical Inspector)
- CQT (Certified Quality Technician)
- CQE (Certified Quality Engineer)
- CQM (Certified Quality Manager)
- CQA (Certified Quality Auditor)
- Duns Number:19-993-4829
- NAICS: 541380 (Mech. Testing Lab or Services)
- Cage Code: 0GB04
- SIC Code: 8734
Something missing? Send us a message or call 952-895-1150 with special considerations.
Scanning Outputs
Point Cloud
- Raw 3D Scan Data (.txt, .asc)
Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.
Polygons
- Raw 3D Scan Data with a polygonal wrap (.stl)
Neutral file primarily used by the 3D printing industry.
Analysis
- 2D Visual Report (.pdf)
- 3D Interactive Report (.pwzip)
Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.
Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".
Modeling Outputs
Native Parametric Formats
Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.
NURBS File Format
Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)
All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.
Need a closer look?
Download fully featured sample files in all of these formats from our download center.
When you may need dimensional inspection vs 3D scanning.
Is your project in its final validation (first article) stage?
A 3D scan may be an acceptable final validation for your project. However, if you need complete dimensional results as specified by the part print, a full FAI using a CMM or other inspection tools may be a better solution.
Do you need accuracy less than 8 microns?
When your tolerances are in the 2-10 micron range, a touch probe or vision CMM is a better solution than 3D scanning. Chromatic white light scanning and confocal micro-laser scanning will produce tighter accuracies, but are limited to relatively flat surfaces, measuring micro-topography.
Does your inspection involve a large number of dimensions?
Measuring multiple features can be done with both a traditional CMM and by extracting the data from a 3D scan. However, it is generally more efficient to extract a few dimensions from a 3D scan than several hundred. As a guide, 20 (or fewer) dimensions on 1 or 2 parts is a good number for 3D scanning. As the dimensions and number of pieces increase, programming and inspecting with a CMM is more cost effective.
Helping you find the best solution.
QC Engineering is dedicated to helping you solve your quality and design challenges. In these situations, we work with QC Inspection to create solutions that are comprehensive, cost-effective, and appropriate to achieve your goals.
Explore Dimensional InspectionSend us a message, or call us 952-895-1150, and let us guide you to the right solution.
Story-Worthy Engineering Services
Built for responsiveness.
QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used specifically for blade validation, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.
To take you to the next step.
When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. You’ll know the accuracy of the CAD model or scan we provide by attending a live on-line review at project close. With a vast set of resources in multiple locations, there is always a way to get your scanning or modeling job done.
Equipment, Capabilities.
Scanning Platforms
- Portable FARO CMMs with Laser Scanning
- CMM Laser Scanners
- Confocal Micro Laser Scanner
- Portable CMMs with Laser Scanning
- CT Scanning (internal geometries)
Software Platforms
- Geomagic
- Polyworks
- Rapidform
- SolidWorks
- Pro-E, Creo
- AutoDesk Inventor
- Rhinoceros
Support Capabilities
- Robust Inventory Control System
- 2,000 lb hoist capacity
- Polishing Wheel
- Cutoff Machine
- Wire EDM resources
- Horizontal Bandsaw
- Parts Cleaning Station
For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.
Qualifications, Accreditations, and Certifications.
ITAR Registered
ASQ Certifications
All inspectors are certified to one or more of the following:
- CQI (Certified Quality Inspector)
- CMI (Certified Mechanical Inspector)
- CQT (Certified Quality Technician)
- CQE (Certified Quality Engineer)
- CQM (Certified Quality Manager)
- CQA (Certified Quality Auditor)
- Duns Number:19-993-4829
- NAICS: 541380 (Mech. Testing Lab or Services)
- Cage Code: 0GB04
- SIC Code: 8734
Scanning Outputs
Point Cloud
- Raw 3D Scan Data (.txt, .asc)
Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.
Polygons
- Raw 3D Scan Data with a polygonal wrap (.stl)
Neutral file primarily used by the 3D printing industry.
Analysis
- 2D Visual Report (.pdf)
- 3D Interactive Report (.pwzip)
Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.
Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".
Modeling Outputs
Native Parametric Formats
Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.
NURBS File Format
Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)
All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.
Tell us about your project! Call 952-895-1150. 8am-5pm CST
"In the industry that we serve, flexibility and adaptability are crucial. These are qualities that you also possess which is why we do not have to look anywhere else for our inspection needs."
- Tedd G, AeroSystems