Scanning and CAD Modeling
Critical Defense
Components.


Precision. On Time.

The QC Engineering group has extensive experience scanning and modeling defense components. ITAR registered and with tremendous capacity to support the DOD and DOE, our secure lab locations can run multiple projects in parallel. Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.

Scanning and CAD Modeling Critical Defense
Components.

Precision. On Time.

The QC Engineering group has extensive experience scanning and modeling defense components.

Providing Capability & Capacity

ITAR registered and with tremendous capacity to support the DOD and DOE, our secure lab locations can run multiple projects in parallel.

With Direct Communication

Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.

Tell us about your project! Call 952-895-1150. 8am-5pm CST

Story-Worthy Engineering Services

Built for responsiveness.

QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications and security; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. You’ll know the accuracy of the model we provide by attending a live on-line review of the CAD geometry compared to the scanned part.

Equipment, Capabilities.

Scanning Platforms
  • Portable CMMs with Laser Scanning
  • CMM Laser Scanners
  • Chromatic White Light Scanning Interferometry
  • Confocal Micro Laser Scanner
  • CT Scanning (internal geometries)
Software Platforms
  • Geomagic
  • Polyworks
  • Rapidform
  • SolidWorks
  • Pro-E, Creo
  • AutoDesk Inventor
  • Rhinoceros
Support Capabilities
  • Robust Inventory Control System
  • 2,000 lb hoist capacity
  • Polishing Wheel
  • Cutoff Machine
  • Horizontal Bandsaw
  • Parts Cleaning Station

For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.


Qualifications, Accreditations, and Certifications.

ITAR Registered
ASQ Certifications

All inspectors are certified to one or more of the following:

  • CQI (Certified Quality Inspector)
  • CMI (Certified Mechanical Inspector)
  • CQT (Certified Quality Technician)
  • CQE (Certified Quality Engineer)
  • CQM (Certified Quality Manager)
  • CQA (Certified Quality Auditor)
Plastics Technology

All CAD Specialists have completed Designing Plastic Parts for Injection Molding studies.


  • Duns Number:19-993-4829
  • NAICS: 541380 (Mech. Testing Lab or Services)
  • Cage Code: 0GB04
  • SIC Code: 8734

    • Something missing? Send us a message or call 952-895-1150 with special considerations.

Scanning Outputs


Point Cloud
  • Raw 3D Scan Data (.txt, .asc)

Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.

point cloud preview of a plastic terminal board
Polygons
  • Raw 3D Scan Data with a polygonal wrap (.stl)

Neutral file primarily used by the 3D printing industry.

polygonal mesh preview of a plastic terminal board
Analysis
  • 2D Visual Report (.pdf)
  • 3D Interactive Report (.pwzip)

Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.

Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".

deviation analysis preview of a plastic terminal board

Modeling Outputs


Native Parametric Formats

Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.

NURBS File Format

Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)

All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.

parametric model preview of a plastic terminal board



When you may need dimensional inspection vs 3D scanning.

Is your project in its final validation (first article) stage?

A 3D scan may be an acceptable final validation for your project. However, if you need complete dimensional results as specified by the part print, a full FAI using a CMM or other inspection tools may be a better solution.

Do you need accuracy less than 8 microns?

When your tolerances are in the 2-10 micron range, a touch probe or vision CMM is a better solution than 3D scanning. Chromatic white light scanning and confocal micro-laser scanning will produce tighter accuracies, but are limited to relatively flat surfaces, measuring micro-topography.

Does your inspection involve a large number of dimensions?

Measuring multiple features can be done with both a traditional CMM and by extracting the data from a 3D scan. However, it is generally more efficient to extract a few dimensions from a 3D scan than several hundred. As a guide, 20 (or fewer) dimensions on 1 or 2 parts is a good number for 3D scanning. As the dimensions and number of pieces increase, programming and inspecting with a CMM is more cost effective.

Helping you find the best solution.

QC Engineering is dedicated to helping you solve your quality and design challenges. In these situations, we work with QC Inspection to create solutions that are comprehensive, cost-effective, and appropriate to achieve your goals.

Explore Dimensional Inspection

Send us a message, or call us 952-895-1150, and let us guide you to the right solution.

Story-Worthy Engineering Services

Built for responsiveness.

QC Engineering strives to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications and security; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with us, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. You’ll know the accuracy of the model we provide by attending a live on-line review of the CAD geometry compared to the scanned part.

Equipment, Capabilities.

Scanning Platforms
  • Portable CMMs with Laser Scanning
  • CMM Laser Scanners
  • Chromatic White Light Scanning Interferometry
  • Confocal Micro Laser Scanner
  • CT Scanning (internal geometries)
Software Platforms
  • Geomagic
  • Polyworks
  • Rapidform
  • SolidWorks
  • Pro-E, Creo
  • AutoDesk Inventor
  • Rhinoceros
Support Capabilities
  • Robust Inventory Control System
  • 2,000 lb hoist capacity
  • Polishing Wheel
  • Cutoff Machine
  • Horizontal Bandsaw
  • Parts Cleaning Station

For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.

Qualifications, Accreditations, and Certifications.

ITAR Registered
ASQ Certifications

All inspectors are certified to one or more of the following:

  • CQI (Certified Quality Inspector)
  • CMI (Certified Mechanical Inspector)
  • CQT (Certified Quality Technician)
  • CQE (Certified Quality Engineer)
  • CQM (Certified Quality Manager)
  • CQA (Certified Quality Auditor)
Plastics Technology

All CAD Specialists have completed Designing Plastic Parts for Injection Molding studies.


    • Duns Number:19-993-4829
    • NAICS: 541380 (Mech. Testing Lab or Services)
    • Cage Code: 0GB04
    • SIC Code: 8734
 

Scanning Outputs


Point Cloud
  • Raw 3D Scan Data (.txt, .asc)

Generated by all 3D scanning technologies, raw geometric data is collected as a point cloud. This is the first step in every project.

point cloud preview of a plastic terminal board
Polygons
  • Raw 3D Scan Data with a polygonal wrap (.stl)

Neutral file primarily used by the 3D printing industry.

polygonal mesh preview of a plastic terminal board
Analysis
  • 2D Visual Report (.pdf)
  • 3D Interactive Report (.pwzip)

Point cloud data is overlaid to an existing CAD model or scan data of another part to show deviation. Used for rapid design verification, tooling validation, and first article inspection.

Referred to as a Deviation Analysis, Comparative Analysis, Computer Aided Inspection (CAI) or Verification (CAV), or Color Map. Reports can also be manipulated to show specific dimensional call outs or FAIs. We call this a "CAV Plus".

deviation analysis preview of a plastic terminal board

Modeling Outputs


Native Parametric Formats

Models developed in your native CAD platform. Constructed with a fully functional design tree, robust models are built for ease of editing.

NURBS File Format

Best for modeling organic shapes that do not need to be edited. Surface or solid file output (.igs, .stp)

parametric model preview of a plastic terminal board

All Reverse Engineering and Modeling project customers receive a Live Model Review at project completion.
 

Tell us about your project! Call 952-895-1150. 8am-5pm CST

Talk to a Quality Expert.

952-895-1150   8a-5p Mon-Fri, CST

QC Group, LLC. | Headquarters
5950 Clearwater Drive, Suite 300
Minnetonka, MN 55343
Get Directions | 952-895-1150

Irving, Texas
4100 W Royal Lane, Suite 125
Irving, TX 75063
Get Directions | 972-915-4333

Albuquerque, New Mexico
1451 Innovation Parkway SE, Suite 650
Albuquerque, NM 87123
Get Directions | 505-299-0975

Effective July 1, 2015, QC Group’s training division separated from QC Group, LLC and began operation as a standalone business entity, QC Training Services, Inc.

They provide individual and group training in a variety of quality and manufacturing topics.  If you are interested in these services, please contact them at qctraininginc.com.

Inquiries that we receive for training services will be forwarded.

qctraininginc.com