Inspection of
Electronic Components.
Precision. On time.
QC Group employees have extensive experience in the manufacture and inspection of electronic connectors and assemblies. Mating component analyses are performed along with pin location checks, and full housing FAIs. Each lab is equipped with surface finish measurement capabilities. With tremendous capacity, our multiple lab locations can run many inspection projects in parallel – whether you are developing product or re-sourcing existing components. Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.
Inspection of
Electronic Components.
Precision. On time.
QC Group employees have extensive experience in the manufacture and inspection of electronic connectors and assemblies. Mating component analyses are performed along with pin location checks, and full housing FAIs. Each lab is equipped with surface finish measurement capabilities. With tremendous capacity, our multiple lab locations can run many inspection projects in parallel – whether you are developing product or re-sourcing existing components. Your project will be personalized - managed by a highly skilled individual with whom you will have a direct line of communication.
Tell us about your project! Call 952-895-1150. 8am-5pm CST
- Story-Worthy Service
- Equipment, Capabilities
- Accreditation, Certifications
- Sample Reports
- Scanning for Inspection
Story-Worthy Dimensional Inspection Service
Built for responsiveness.
Our labs strive to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.
To take you to the next step.
When you begin a project with QC Inspection, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With a vast set of resources in multiple locations, there is always a way to get your measurement job done.
Lab Equipment, Capabilities.
Coordinate Measuring Machines (CMM)
- Brown & Sharpe CMMs with Continuous Scan (PC-DMIS)
- Zeiss Contura with Continuous Scan (Calypso)
- OGP Vision CMMs (Measuremind)
- Optiv Performance with Chromatic White Light Interferometry Scanning
- Optiv Classic (PC-DMIS)
- FARO/LDI Portable CMMs with Laser Scanners
Scanning Capabilities
- LDI Surveyor 3D Laser Scanners
- Cyberscan Confocal Micro-Scanners
- Chromatic White Light Interferometry Scanning
- Full-Contact Continuous CMM Scanning
Surface Finish Evaluation
- Zeiss Surfcom Profilometers
- CyberScan Laser Micro-Scanner (non-contact surface finish)
Support Capabilities
- Optical Comparators and other standard dimensional inspection equipment
- Robust Inventory Control System
- Class 10,000 Clean Room Inspection
- ESD Capabilities
- Parts Cleaning Station
For specific inquiries about equipment, software platforms and scanning capability, send us a message or call 952-895-1150.
Qualifications, Accreditations, and Certifications.
A2LA Accredited to ISO/IEC 17025:2005
ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. - ISO.org
ASQ Certifications
All inspectors are certified to one or more of the following:
- CQI (Certified Quality Inspector)
- CMI (Certified Mechanical Inspector)
- CQT (Certified Quality Technician)
- CQE (Certified Quality Engineer)
- CQM (Certified Quality Manager)
- CQA (Certified Quality Auditor)
ITAR Registered
- A2LA Testing Cert: 1172.01
- Duns Number:19-993-4829
- NAICS: 541380 (Mech. Testing Lab or Services)
- Cage Code: 0GB04
- SIC Code: 8734
Something missing? Send us a message or call 952-895-1150 with special considerations.
Sample Reports, Deliverables
Bubbled Print
Download the PDF 1,012.42 KB
First Article Inspection Report (FAI)
Download the PDF 47.09 KB
Certificate of Inspection
Download the PDF 60.84 KB
Statement of Uncertainty
Download the PDF 53.50 KBDo you have special delivery requirements? We routinely customize our reports and data delivery based on customer need. Send us a message or call 952-895-1150 with special considerations.
When to use 3D precision scanning for your project.
Is your project in the development stage?
When you need quick feedback on the overall part to determine its accuracy to the design, a 3D scan may be the best option. A full FAI or even a partial dimensional inspection may be more than is necessary when performing an initial validation.
Are you making a comparison of one part to another?
Comparing cavity-to-cavity or supplier-to-supplier can be a daunting task if the results are presented in as a list of print features. A 3D comparative analysis can highlight trouble spots quickly. Perhaps then you will need more detailed information with a dimensional inspection of a localized area.
Is your part primarily controlled by profile with a few critical dimensions?
Industries continue to define more of a product’s features with profile tolerances. A 3D scan is the most descriptive method for reporting a profile and the variations throughout the surface. Your project may require that specific numerical profile data must be collected with a CMM. That same data can be reported from a scan output.
Combine Scanning With Traditional Inspection
In these situations, we may recommend a hybrid inspection solution for your project that utilizes the 3D scanning and processing capabilities of QC Engineering, or combines these capabilities with traditional inspection techniques to provide the most useful data possible.
Get More Information on 3D ScanningSend us a message, or call us 952-895-1150, and let us guide you to the right solution.
Story-Worthy Dimensional Inspection Service
Built for responsiveness.
Our labs strive to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.
To take you to the next step.
When you begin a project with QC Inspection, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With a vast set of resources in multiple locations, there is always a way to get your measurement job done.
Lab Equipment, Capabilities.
Coordinate Measuring Machines (CMM)
- Brown & Sharpe CMMs with Continuous Scan (PC-DMIS)
- Zeiss Contura with Continuous Scan (Calypso)
- OGP Vision CMMs (Measuremind)
- Optiv Performance with Chromatic White Light Interferometry Scanning
- Optiv Classic (PC-DMIS)
- FARO/LDI Portable CMMs with Laser Scanners
Scanning Capabilities
- LDI Surveyor 3D Laser Scanners
- Cyberscan Confocal Micro-Scanners
- Chromatic White Light Interferometry Scanning
- Full-Contact Continuous CMM Scanning
Surface Finish Evaluation
- Zeiss Surfcom Profilometers
- CyberScan Laser Micro-Scanner (non-contact surface finish)
Support Capabilities
- Optical Comparators and other standard dimensional inspection equipment
- Robust Inventory Control System
- Class 10,000 Clean Room Inspection
- ESD Capabilities
- Parts Cleaning Station
For specific inquiries about equipment, software, platforms and capability, send us a message or call 952-895-1150.
Qualifications, Accreditations, and Certifications.
A2LA Accredited to ISO/IEC 17025:2005
ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. - ISO.org
ASQ Certifications
All inspectors are certified to one or more of the following:
- CQI (Certified Quality Inspector)
- CMI (Certified Mechanical Inspector)
- CQT (Certified Quality Technician)
- CQE (Certified Quality Engineer)
- CQM (Certified Quality Manager)
- CQA (Certified Quality Auditor)
ITAR Registered
- A2LA Testing Cert: 1172.01
- Duns Number:19-993-4829
- NAICS: 541380 (Mech. Testing Lab or Services)
- Cage Code: 0GB04
- SIC Code: 8734
Sample Reports, Deliverables
Bubbled Print
Download the PDF 1,012.42 KB
First Article Inspection Report (FAI)
Download the PDF 47.09 KB
Certificate of Inspection
Download the PDF 60.84 KB
Statement of Uncertainty
Download the PDF 53.50 KBDo you have special delivery requirements? We routinely customize our reports and data delivery based on customer need. Send us a message or call 952-895-1150 with special considerations.
Tell us about your project! Call 952-895-1150. 8am-5pm CST
"The QC Group has been responsive and good to work with. They provide results in a manner that is easy to use for presenting to our customers (report format) or for performing analysis (electronic data format). Overall, there is value in the services that The QC Group provides."
- Paul A, Enercon Technologies