Inspection of
Oil & Gas
Equipment


Precision On A Larger Scale.

QC Group inspectors are experts in precision.  When data needs to be captured on larger equipment, The QC Group has the expertise to provide accurate results when you need it.   With our flexible schedule we can be on location anywhere in the US to capture inspection data or to scan equipment and develop a CAD model.  Your project will be personalized - managed by a highly trained individual with whom you will have a direct line of communication.

Inspection of
Oil & Gas
Equipment

Precision On A Larger Scale.

QC Group inspectors are experts in precision.  When data needs to be captured on larger equipment, The QC Group has the expertise to provide accurate results when you need it.   With our flexible schedule we can be on location anywhere in the US to capture inspection data or to scan equipment and develop a CAD model.  Your project will be personalized - managed by a highly trained individual with whom you will have a direct line of communication.

Tell us about your project! Call 952-895-1150. 8am-5pm CST

Story-Worthy Dimensional Inspection Services

Built for responsiveness and agility.

Our labs strive to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with QC Inspection, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With a vast set of resources in multiple locations, there is always a way to get your measurement job done.

Lab Equipment, Capabilities.

Coordinate Measuring Machines (CMM)
  • FARO/LDI Portable CMMs with Laser Scanners
  • Laser Tracker
  • Brown & Sharpe CMMs with Continuous Scan (PC-DMIS)
  • Zeiss Contura with Continuous Scan (Calypso)
  • OGP Vision CMMs (Measuremind)
  • Optiv Performance with Chromatic White Light Interferometry Scanning
  • Optiv Classic (PC-DMIS)
Scanning Capabilities
  • LDI Surveyor 3D Laser Scanners
  • Cyberscan Confocal Micro-Scanners
  • Chromatic White Light Interferometry Scanning
  • Full-Contact Continuous CMM Scanning
Surface Finish Evaluation
  • Zeiss Surfcom Profilometers
  • CyberScan Laser Micro-Scanner (non-contact surface finish)
Support Capabilities
  • Optical Comparators and other standard dimensional inspection equipment
  • Robust Inventory Control System
  • 2,000 lb hoist capacity
  • Class 10,000 Clean Room Inspection
  • Polishing Wheel
  • Cutoff Machine
  • Horizontal Bandsaw
  • Parts Cleaning Station
  • Wire EDM Resources

For specific inquiries about equipment, software, platforms and capability, send us a message or call 952-895-1150.


Qualifications, Accreditations, and Certifications.

A2LA Accredited to ISO/IEC 17025:2005

ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. - ISO.org

View Accreditation & Scope

ASQ Certifications

All inspectors are certified to one or more of the following:

  • CQI (Certified Quality Inspector)
  • CMI (Certified Mechanical Inspector)
  • CQT (Certified Quality Technician)
  • CQE (Certified Quality Engineer)
  • CQM (Certified Quality Manager)
  • CQA (Certified Quality Auditor)
ITAR Registered
JCP Registered
SAM Registered
DCS Certified
NADCA Participant

  • A2LA Testing Cert: 1172.01
  • Duns Number:19-993-4829
  • NAICS: 541380 (Mech. Testing Lab or Services)
  • Cage Code: 0GB04
  • SIC Code: 8734
    A2LA-logo_transparent

    Something missing? Send us a message or call 952-895-1150 with special considerations.

    Sample Reports, Deliverables


    Bubbled Print

    Bubbled Print

    Download the PDF 1.12 MB

    First Article Inspection Report (FAI)

    First Article Inspection Report (FAI)

    Download the PDF 43.37 KB

    Certificate of Inspection

    Certificate of Inspection

    Download the PDF 60.86 KB

    Statement of Uncertainty

    Statement of Uncertainty

    Download the PDF 51.98 KB


    Do you have special delivery requirements? We routinely customize our reports and data delivery based on customer need. Send us a message or call 952-895-1150 with special considerations.

    When to use 3D precision scanning for your project.

    Is your project in the development stage?

    When you need quick feedback on the overall part to determine its accuracy to the design, a 3D scan may be the best option. A full FAI or even a partial dimensional inspection may be more than is necessary when performing an initial validation.

    Are you making a comparison of one part to another?

    Comparing cavity-to-cavity or supplier-to-supplier can be a daunting task if the results are presented in as a list of print features. A 3D comparative analysis can highlight trouble spots quickly. Perhaps then you will need more detailed information with a dimensional inspection of a localized area.

    Is your part primarily controlled by profile with a few critical dimensions?

    Industries continue to define more of a product’s features with profile tolerances. A 3D scan is the most descriptive method for reporting a profile and the variations throughout the surface. Your project may require that specific numerical profile data must be collected with a CMM. That same data can be reported from a scan output.

    Combine Scanning With Traditional Inspection

    In these situations, we may recommend a hybrid inspection solution for your project that utilizes the 3D scanning and processing capabilities of QC Engineering, or combines these capabilities with traditional inspection techniques to provide the most useful data possible.

    Get More Information on 3D Scanning

    Send us a message or call us 952-895-1150, and let us guide you to the right solution.

    Story-Worthy Dimensional Inspection Services

    Built for responsiveness and agility.

    Our labs strive to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.

    To take you to the next step.

    When you begin a project with QC Inspection, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With a vast set of resources in multiple locations, there is always a way to get your measurement job done.

    Lab Equipment, Capabilities.

    Coordinate Measuring Machines (CMM)
    • FARO/LDI Portable CMMs with Laser Scanners
    • Laser Tracker
    • Brown & Sharpe CMMs with Continuous Scan (PC-DMIS)
    • Zeiss Contura with Continuous Scan (Calypso)
    • OGP Vision CMMs (Measuremind)
    • Optiv Performance with Chromatic White Light Interferometry Scanning
    • Optiv Classic (PC-DMIS)
    Scanning Capabilities
    • LDI Surveyor 3D Laser Scanners
    • Cyberscan Confocal Micro-Scanners
    • Chromatic White Light Interferometry Scanning
    • Full-Contact Continuous CMM Scanning
    Surface Finish Evaluation
    • Zeiss Surfcom Profilometers
    • CyberScan Laser Micro-Scanner (non-contact surface finish)
    Support Capabilities
    • Optical Comparators and other standard dimensional inspection equipment
    • Robust Inventory Control System
    • 2,000 lb hoist capacity
    • Class 10,000 Clean Room Inspection
    • Polishing Wheel
    • Cutoff Machine
    • Horizontal Bandsaw
    • Parts Cleaning Station
    • Wire EDM Resources

    For specific inquiries about equipment, software, platforms and capability, send us a message or call 952-895-1150.

    Qualifications, Accreditations, and Certifications.

    A2LA Accredited to ISO/IEC 17025:2005

    ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. - ISO.org

    View Accreditation & Scope

    ASQ Certifications

    All inspectors are certified to one or more of the following:

    • CQI (Certified Quality Inspector)
    • CMI (Certified Mechanical Inspector)
    • CQT (Certified Quality Technician)
    • CQE (Certified Quality Engineer)
    • CQM (Certified Quality Manager)
    • CQA (Certified Quality Auditor)
    ITAR Registered
    JCP Registered
    SAM Registered
    DCS Certified
    NADCA Participant

    • A2LA Testing Cert: 1172.01
    • Duns Number:19-993-4829
    • NAICS: 541380 (Mech. Testing Lab or Services)
    • Cage Code: 0GB04
    • SIC Code: 8734
    A2LA-logo_transparent

    Sample Reports, Deliverables


    Bubbled Print

    Bubbled Print

    Download the PDF 1.12 MB

    First Article Inspection Report (FAI)

    First Article Inspection Report (FAI)

    Download the PDF 43.37 KB

    Certificate of Inspection

    Certificate of Inspection

    Download the PDF 60.86 KB

    Statement of Uncertainty

    Statement of Uncertainty

    Download the PDF 51.98 KB


    Do you have special delivery requirements? We routinely customize our reports and data delivery based on customer need. Send us a message or call 952-895-1150 with special considerations.

    Tell us about your project! Call 952-895-1150. 8am-5pm CST

    "The QC Group has been responsive and good to work with. They provide results in a manner that is easy to use for presenting to our customers (report format) or for performing analysis (electronic data format). Overall, there is value in the services that The QC Group provides."

    - Paul A, Enercon Technologies

    Talk to a Quality Expert.

    952-895-1150   8a-5p Mon-Fri, CST

    QC Group, LLC. | Headquarters
    5950 Clearwater Drive, Suite 300
    Minnetonka, MN 55343
    Get Directions | 952-895-1150

    Irving, Texas
    4100 W Royal Lane, Suite 125
    Irving, TX 75063
    Get Directions | 972-915-4333

    Albuquerque, New Mexico
    1451 Innovation Parkway SE, Suite 650
    Albuquerque, NM 87123
    Get Directions | 505-299-0975

    Effective July 1, 2015, QC Group’s training division separated from QC Group, LLC and began operation as a standalone business entity, QC Training Services, Inc.

    They provide individual and group training in a variety of quality and manufacturing topics.  If you are interested in these services, please contact them at qctraininginc.com.

    Inquiries that we receive for training services will be forwarded.

    qctraininginc.com